Product desciption:

1.This system is a vehicle assistance device that helps driver lane changing safely during driving.
2.With the aid of 24GHz microwave sensor, probe the side / rear of the vehicle for those moving objects into the blind spot of the detection zone.
3.The system works in a set of a control box (controlled by computer), two microwave sensors, two blind region monitor (or LED light), a buzzer and the wire harness which is the perfect connection of microwave and computer.
4.There is blind zone at the rear of the vehicle which is easy to endanger driving safety.! When you installed BSM into your lovely car, no matter it's day time, night time or even in the snow,you can be alerted whenever there is a moving object pop into the rear of the vehicle, with the aid of LED lighting on , blinking, buzzer sound so that the driver can be cautious when lane changing to avoid the possibility of side crash accident.
5.After the vehicle is stopped, the system delays for 30s. When there are bicycles, electric cars, orcycles, pedestrians and other vehicles near the vehicle, the system will light up and there is a risk of opening the doors. Please confirm the safety before opening the doors.

Why install a blind spot monitoring assist system?

1.Turn lane to merge:Lane changing blind spots are prone to collisions.
2.Danger of reversing:Suddenly running out of other cars, collisions may easily occur.
3.Obstructed vision:Encountered bad
weather.
4.Blind Spot Killer:Can't see behind
the car.

Common Scenarios

BSD Blind Spot Detection Warning

When your car is driving, if there is a car in the blind spot of the rear view mirror, the yellow light will flash to remind you that there is a car coming from the side. At this time, you want to overtake, When your car wants to change lanes and turn the turn signal to the left, the yellow light will change red. The red light flashes and the buzzer sounds!

AOA Active Overtaking Assist

Warning Unlike when there is a car coming from behind-LCA. When our vehicle is preparing to overtake vehicles ahead without changing lanes, the rearview mirror will not warn. When your car wants to change lanes and turn the turn signal to the left, the yellow light will change red.The red light flashes and the buzzer sounds!

LCA Lane Change Assist Warning.

When driving at high speed, if a vehicle is approaching us quickly from a distance (15m) in the adjacent lane,the rearview mirror will light up with a yellow light to tell us that a vehicle is approaching quickly!

PCTA Parking Car Warning.

When our vehicle is about to reverse out of the garage and the system monitors that there are moving objects approaching,the yellow light on the rearview mirror flashes.

Applicable To Various Environmental Scenarios

Not affected by the environment.
Not afraid of wind and rain.

The Difference Between White Mirror And Blue Mirror

After the lens is replaced, the electric heating function of the original car will not be affected.The blue mirror has an anti-dazzle function.

Installation Display

High performance chip

Accurately process the massive amounts of information received,respond quickly, and convey instructions.
1.Sensitive.
2.Processed quickly.
3.Strong reliability.

Replace original car rear view glass Still retains electric heating function

Installation steps

Note:The installation steps are different for different models. Please refer to the product manual for details.
1.Dismantle the door panels of the cab to facilitate subsequent wiring.
2.Remove the reflector and string up the alarm light wires.
3.Remove rear bumper.
4.Mounting bracket.
5.Install the measurement radar bracket at a horizontal angle of 25° to the vehicle body.
Note: The horizontal angle is not the horizontal line of the local body surface,but the horizontal line of space.Radar installation height 0.4-1m.
6.Install reflectors back to the car and connect the alarm light wire to the turn signal wire.

Product Display